Acolyte DMX Manual do Utilizador descarregar pdf (Página 9)

All artwork and images copyright Acolyte Industries Inc.

Use or reprinting prohibited unless explicitly approved by Acolyte Industries.

PAGE 8

USING ESA PRO SOFTWARE TO PROGRAM YOUR CONTROLLER

Adding Your DMX Devices

The Fixtures Patch

The editor screen is the place where you will have to patch your xtures. This is the rst thing to do to create

your show.

Click on the “Add xture(s)” button from the toolbar to open the “Patch manager” window.

Here is the procedure to add new xtures:

- select the prole from the left-side manufacturer list

- select the DMX universe

- enter the rst DMX channel (address of the 1st xture)

- enter the number of devices

- validate by clicking on the “patch” button

Note: There is a another method to add a xture. You can directly drag and drop the prole to the grid. Then,

you can right-click on the xture and select “duplicate” from the menu to add more devices (using the same

prole).

Once the patch is ready, you will need to create and setup the zones (areas). The next section shows how to

proceed.

CREATING A NEW SHOW

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Sem comentários

Acolyte DMX Manual do Utilizador Página 9