Acolyte DMX Manual do Utilizador descarregar pdf (Página 6)

All artwork and images copyright Acolyte Industries Inc.

Use or reprinting prohibited unless explicitly approved by Acolyte Industries.

PAGE 5

EXTENSION SOCKET REAR CONNECTORS (OPTIONAL)

RS232 Connections: Make a 3-pin cable

Use TX, RX and G (GND)

Set the RS232 parameters to: 9600 bds

8 bits, no parity, 2 stop bits

RS232 Triggering

To play a scene, send 3 bytes (HEX mode): 1 x 255 (x = scene number)

To stop a scene, send 3 bytes (HEX mode): 2 x 255 (x = scene number)

To pause a scene, send 3 bytes (HEX mode): 3 x 255 (x = scene number)

To release a scene, send 3 bytes (HEX mode): 4 x 255 (x = scene number)

To reset a scene, send 3 bytes (HEX mode): 5 x 255 (x = scene number)

Note: the scene number (x) can be from 1 to 40. For instance, 11 means Page B, Scene #3

Troubleshooting

If the on/off and all 8 LED buttons are ashing, the SD card is missing or damaged

If all 8 LED buttons are ashing, the SD card is empty

If all LEDs are ashing, there is a problem with the rmware

Ports 1-8: Use ports 1 to 8 to make contacts

between G (GND) and P1...P8

Blackout: Connect a relay

Use the 2 pins BK and G (GND)

Example of relay

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Sem comentários

Acolyte DMX Manual do Utilizador Página 6